Phoenix Inverter 48/3000 230V Smart
PARALLEL AND 3-PHASE OPERATION: No
INPUT VOLTAGE RANGE: 9,3 – 17V; 18,6 – 34V; 37,2 – 68V
- 230VAC or 120VAC +/- 3%
- 50Hz or 60Hz +/- 0,1%
CONTINUOUS OUTPUT POWER AT 25°C (2): 3000VA
CONTINUOUS OUTPUT POWER AT 25°C: 2400W
CONTINUOUS OUTPUT POWER AT 40°C: 2200W
CONTINUOUS OUTPUT POWER AT 65°C: 1700W
PEAK POWER: 6000W
DYNAMIC (LOAD DEPENDENT) DC LOW SHUT DOWN (FULLY CONFIGURABLE): Dynamic cut-off
MAXIMUM EFFICIENCY: 95%
ZERO LOAD POWER: 15W
ZERO LOAD POWER IN ECO MODE: 2.8W
PROGRAMMABLE RELAY (2): Yes
STOP & START UP POWER ECO-MODE: Adjustable
BLUETOOTH WIRELESS COMMUNICATION: For remote monitoring and system integration
VE.DIRECT COMMUNICATION PORT: For remote monitoring and system integration
REMOTE ON-OFF: Yes
OPERATING TEMPERATURE RANGE: -40 to +65°C (fan assisted cooling)
MATERIAL & COLOUR: Steel (blue RAL 5012; and black RAL 9017)
BATTERY-CONNECTION: 2+2 M8 Bolts
230V AC-CONNECTION: Screw Terminals
DIMENSIONS (H x W x D): 485 x 285 x 150 mm
Phoenix Inverter 48/3000 230V Smart
Victron Energy’s Phoenix Inverter 48/3000 230V Smart is an efficient and powerful inverter that can supply most common plug appliances in home, cars, caravans and boats. Phoenix Smart Inverters offer proven reliability for over many years. These inverters are short circuit proof and equipped with protection against overheating, whether due to overload or high ambient temperature.
Phoenix Smart Inverters are also equipped with VE.Direct communication port, which can be connected to a computer via VE.Direct to USB interface cable, and, smartphones, tablets, laptops and other devices via VE.Direct Bluetooth Smart dongle.
The Phoenix Inverter 48/3000 230V Smart features full configuration via tablet or smartphone via its built-in Bluetooth. Users can set up the low battery voltage alarm trip and reset levels, low battery voltage cut-off and restart levels, dynamic cut-off: load dependent cut-off level, output voltage 210 – 245, frequency 50 Hz or 60 Hz, ECO mode on/off and ECO mode sense level, and alarm relay. It can also be used to monitor the input and output voltage, the load percentage and alarms.
The Phoenix Inverter 48/3000 230V Smart is also ideal for applications that need high start-up power such as power converters for LED lamps, halogen lamps or even electric tools. It also features ECO mode, where it will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). Furthermore, the Phoenix Smart Inverter will remain on even if the load exceeds the pre-set level.
Victron Energy’s Phoenix Smart Inverters series also features remote on-off switch that can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus.
To transfer to another AC source or for our low power inverters, it is highly recommended to use Filax Automatic Transfer Switch. The Filax features very short switchover time of less than 20 milliseconds. This will allow computers and other electronic equipment to continue operating without experiencing disruption.
The Phoenix Inverter 48/3000 230V Smart, like other models in the Phoenix Smart Inverters series, has passed the EN 60335-1 Safety Standards; the EN 55014-1 / EN 55014-2/ EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3 Emission Immunity Standards and the ECE R10-5 Automotive Directive Standards.