Victron Discount code: VICT5

Call us 1300 368 331

View CART

SKU: PIN242120300 Category:

Phoenix Inverter 24/1200 230V VE.Direct AU/NZ

Product Specifications

SPECIFICATIONS:
CONTINUOUS POWER AT 25°C (1): 1200VA
CONTINUOUS POWER AT 25°C / 40°C: 1000 / 850W
PEAK POWER: 2200W
OUTPUT AC VOLTAGE / FREQUENCY (ADJUSTABLE):

  • 230VAC or 120VAC +/- 3%
  • 50Hz or 60Hz +/- 0,1%

INPUT VOLTAGE RANGE: 18,4 – 34,0V
DC LOW SHUT DOWN (ADJUSTABLE): 18,6V
DYNAMIC (LOAD DEPENDENT) DC LOW SHUT DOWN (FULLY CONFIGURABLE): Dynamic cut-off
DC LOW RESTART AND ALARM (ADJUSTABLE):  21,8V
BATTERY CHARGED DETECT (ADJUSTABLE):  28,0V
MAXIMUM EFFICIENCY: 91%
ZERO LOAD POWER: 8W
DEFAULT ZERO-LOAD POWER IN ECO MODE (DEFAULT RETRY INTERVAL: 2.5 S, ADJUSTABLE): 1.5
ECO MODE STOP AND START POWER SETTING: Adjustable
OPERATING TEMPERATURE RANGE: -40 to +65°C (fan assisted cooling) Derate 1,25% per °C above 40°C
REMOTE ON-OFF: Yes
ENCLOSURE
MATERIAL & COLOUR: Steel chassis and plastic cover (blue Ral 5012)
BATTERY-CONNECTION: Screw terminals
MAXIMUM CABLE CROSS-SECTION: 25 mm2 AWG 2
STANDARD AC OUTLETS: 230V: Schuko (CEE 7/4), IEC-320 (male plug included) UK (BS 1363), AU/NZ (AS/NZS 3112) 120V: Nema 5-15R
WEIGHT: 7.4kg
DIMENSIONS (H x W x D): 117 x 232 x 327 mm

See full description

$691.00

Phoenix Inverter 24/1200 230V VE.Direct AU/NZ

Product Description

The Phoenix Inverter 24/1200 230V VE.Direct AU/NZ is a pure sine wave converter that converts stored DC power in the batteries into AC power just like the power provided to residentials so that you can run your electric appliances wherever you are. These inverters offer proven reliability for over many years. These inverters are short circuit proof and equipped with protection against overheating, whether due to overload or high ambient temperature.

Phoenix pure sine wave inverters come with VE.Direct communication port that can be connected to a computer via VE.Direct to USB interface cable, and, smartphones, tablets, laptops and other devices via VE.Direct Bluetooth Smart dongle. These pure sine wave inverters from Victron are fully configurable via USB or Bluetooth connection. Users can set up the low battery voltage alarm trip and reset levels, low battery voltage cut-off and restart levels, dynamic cut-off: load dependent cut-off level, output voltage 210 – 245, frequency 50 Hz or 60 Hz, and finally, the ECO mode on/off and ECO mode sense level. It can also be used for monitoring the input and output voltage, percent load and alarms.

The Phoenix Inverter 24/1200 230V VE.Direct AU/NZ is also ideal for applications that need high start-up power such as power converters for LED lamps, halogen lamps or even electric tools. It also features ECO mode, where it will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.

These pure sine wave inverters also features LED diagnosis and have remote on-off switch that can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.

The Phoenix Inverter 24/1200 230V VE.Direct AU/NZ, like other Phoenix pure sine wave inverters, has passed the N-IEC 60335-1 / EN-IEC 62109-1 Safety standards, the EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3 EMC standards and the ECE R10-4 Automotive Directive standard.

Additional Information

preloader