BlueSolar MPPT 250/70-Tr VE.Can
Product Specifications
| BlueSolar Charge Controller | 250/70 | 250/85 | 250/100 | |||
| Battery Voltage | 12 / 24 / 48V Auto Select(Refer to manual to select 36V) | |||||
| Rated charge current | 70A | 85A | 100A | |||
| Nominal PV power, 12V 1a,b) | 1000W | 1200W | 1450W | |||
| Nominal PV power, 24V 1a,b) | 2000W | 2400W | 2900W | |||
| Nominal PV power, 36V 1a,b) | 3000W | 3600W | 4350W | |||
| Nominal PV power, 48V 1a,b) | 4000W | 4900W | 5800W | |||
| Max. PV short circuit current 2) | 35A (max 30A per MC4 conn.) | 70A (max 30A per MC4 conn.) | ||||
| Maximum PV open circuit voltage | 250V absolute maximum coldest conditions
245V start-up and operating maximum |
|||||
| Maximum efficiency | 99% | |||||
| Self-consumption | Less than 35mA @ 12V / 20mA @ 48V | |||||
| Charge voltage ‘absorption’ | Default setting: 14,4 / 28,8 / 43,2 / 57,6V
(adjustable with: rotary switch, display, VE.Direct or Bluetooth) |
|||||
| Charge voltage ‘float’ | Default setting: 13,8 / 27,6 / 41,4 / 55,2V
(adjustable: rotary switch, display, VE.Direct or Bluetooth) |
|||||
| Charge voltage ‘equalization’ | Default setting: 16,2V / 32,4V / 48,6V / 64,8V (adjustable) | |||||
| Charge algorithm | multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm | |||||
| Temperature compensation | -16 mV / -32 mV / -64 mV / °C | |||||
| Protection | PV reverse polarity / Output short circuit / Over temperature | |||||
| Operating temperature | -30 to +60°C (full rated output up to 40°C) | |||||
| Humidity | 95%, non-condensing | |||||
| Maximum altitude | 5000m (full rated output up to 2000m) | |||||
| Environmental condition | Indoor, unconditioned | |||||
| Pollution degree | PD3 | |||||
| Data communication port | VE.CAN, VE.Direct or Bluetooth via bluetooth dongle | |||||
| Remote on/off | Yes (2 pole connector) | |||||
| Programmable relay | DPST AC rating: 240VAC / 4A
DC rating: 4A up to 35VDC, 1A up to 60VDC |
|||||
| Parallel operation | Yes, parallel synchronized operation with VE.CAN | |||||
| ENCLOSURE | ||||||
| Colour | Blue (RAL 5012) | |||||
| PV terminals 3) | 35 mm² / AWG2 (Tr models)
Two pairs of MC4 connectors (MC4 models) |
35 mm² / AWG2 (Tr models)
Three pairs of MC4 connectors (MC4 models) |
||||
| Battery terminals | 35mm² / AWG2 | |||||
| Protection category | IP43 (electronic components), IP22 (connection area) | |||||
| Weight | 3 kg | 4,5kg | ||||
| Dimensions (h x w x d) in mm | Tr models: 185 x 250 x 95 mm
MC4 models: 215 x 250 x 95 mm |
Tr models: 216 x 295 x 103
MC4 models: 246 x 295 x 103 |
||||
$1,314.00
BlueSolar MPPT 250/70-Tr VE.Can
Product Description
MPPT: Ultra fast maximum power point tracking– The MPPT VE.Can BlueSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model. The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium and others.
Control your charger remotely- The MPPT VE.Can BlueSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App (bluetooth dongle requried). This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.
Daisy chain additional units- The VE.Can BlueSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can BlueSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units. When connected to each other, all individual VE.Can BlueSolar chargers, will synchronise their charge stages. They can also send their data, via a single cable, to a GX monitoring device.
Remote monitoring & control– If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s).
BlueSolar control display (optional extra)– The VE.Can BlueSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control. The remote on/off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in Bluetooth dongle provides live-data, set-up and management, straight from the screen of your device.
Ultra-fast maximum power point tracking (MPPT)– Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced maximum power point detection in case of partial shading conditions– If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency- No cooling fan. Maximum efficiency exceeds 98%.
Flexible charge algorithm- Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection- Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.
VE.Can: the multiple controller solution- Up to 25 units can be synchronised with VE.Can
VE.Direct or VE.Can – For a wired data connection to a Color Control GX, other GX products, PC or other devices
Remote on-off & programmable relay – To connect for example to a VE.BUS BMS. Can be programmed to trip on an alarm, or other events
