Victron Discount code: VICT5

Call us 1300 368 331


SKU: SCC115110420 Category:

BlueSolar MPPT 150/100-Tr VE.Can

Product Specifications
BlueSolar Charge Controller         MPPT 150/100
Battery voltage 12 / 24 / 48V Auto Select (software tool needed to select 36V)
Rated charge current       100A
Nominal PV power, 12V 1a,b)         1450W
Nominal PV power, 24V 1a,b)         2900W
Nominal PV power, 48V 1a,b)         5800W
Max. PV short circuit current 2)       70A
Maximum PV open circuit voltage 150V absolute maximum coldest conditions

145V start-up and operating maximum

Maximum efficiency 98%
Self-consumption 10 mA
Charge voltage ‘absorption’ Default setting: 14,4 / 28,8 / 43,2 / 57,6V (adjustable)
Charge voltage ‘float’ Default setting: 13,8 / 27,6 / 41,4 / 55,2V (adjustable)
Charge algorithm multi-stage adaptive
Temperature compensation -16 mV / -32 mV / -64 mV / °C
Protection Battery reverse polarity (fuse, not user accessible)

PV reverse polarity / Output short circuit / Over temperature

Operating temperature -30 to +60°C (full rated output up to 40°C)
Humidity 95%, non-condensing
Data communication port and

remote on-off

VE.CAN & VE.Direct (see the data communication whitepaper on our website)
Parallel operation Yes (not synchronized)
Colour Blue (RAL 5012)

PV terminals 3)

35 mm² / AWG2 (Tr models)

Two sets of MC4 connectors (MC4 models up to 150/70)

Three sets of MC4 connectors (MC4 models 150/85 and 150/100)

Battery terminals 35 mm² / AWG2
Protection category IP43 (electronic components), IP22 (connection area)
Weight   4,5kg
Dimensions (h x w x d) in mm Tr models: 216 x 295 x 103


See full description


BlueSolar MPPT 150/100-Tr VE.Can

Product Description

MPPT: Ultra fast maximum power point tracking– The MPPT VE.Can BlueSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model. The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium and others.

Control your charger remotely- The MPPT VE.Can BlueSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App (bluetooth dongle requried). This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data. 

Daisy chain additional units- The VE.Can BlueSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can BlueSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units. When connected to each other, all individual VE.Can BlueSolar chargers, will synchronise their charge stages. They can also send their data, via a single cable, to a GX monitoring device.

Remote monitoring & control– If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s).

BlueSolar control display (optional extra)– The VE.Can BlueSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control. The remote on/off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in Bluetooth dongle provides live-data, set-up and management, straight from the screen of your device.

Ultra-fast maximum power point tracking (MPPT)– Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Advanced maximum power point detection in case of partial shading conditions– If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.

Outstanding conversion efficiency- No cooling fan. Maximum efficiency exceeds 98%.

Flexible charge algorithm- Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).

Extensive electronic protection- Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.

VE.Can: the multiple controller solution- Up to 25 units can be synchronised with VE.Can

VE.Direct or VE.Can – For a wired data connection to a Color Control GX, other GX products, PC or other devices


Remote on-off & programmable relay – To connect for example to a VE.BUS BMS. Can be programmed to trip on an alarm, or other events

Additional Information