SKU: BPC123047012 Category:

Blue Smart IP22 Charger 12/30(1) 230V AU/NZ

Product Specifications

SPECIFICATIONS:
INPUT VOLTAGE RANGE: 180 – 265 VAC
CHARGE CURRENT, NORMAL MODE: 15 / 20 / 30 A
CHARGE CURRENT, NIGHT OR LOW: 7,5 / 10 / 15 A
EFFICIENCY: 93%
NO LOAD POWER CONSUMPTION: 0.5 W
FREQUENCY: 45 – 65 Hz
NUMBER OF OUTPUTS: 1
CHARGE VOLTAGE ‘ABSORPTION’:

  • Normal: 14,4V
  • High: 14,7V
  • Li-ion: 14,2V

CHARGE VOLTAGE ‘FLOAT’:

  • Normal: 13,8V
  • High: 13,8V
  • Li-ion: 13,5V

CHARGE VOLTAGE ‘STORAGE’:

  • Normal: 13,2V
  • High: 13,2V
  • Li-ion: N/A

CHARGE ALGORITHM: 6-stage adaptive
CAN BE USED AS POWER SUPPLY: Yes
OPERATING TEMPERATURE RANGE: -20 to +50°C
MATERIAL & COLOUR: Aluminium (Blue RAL 5012)
BATTERY CONNECTION: Screw terminals 13 mm² / AWG6
PROTECTION CATEGORY: IP22
WEIGHT: 1.3 kg
DIMENSIONS (HxWxD): 235 x 108 x 65 mm

See full description

$242.16

Blue Smart IP22 Charger 12/30(1) 230V AU/NZ

Product Description

The Victron Blue Smart IP22 Charger 12/30(1) 230V AU/NZ provides a wireless solution for monitoring the current and voltage, changing the settings, and updating the charger upon the availability of new features.

This Blue Smart IP22 Charger offers high efficiency, with up to 94% efficiency. Like the other chargers included in the Blue Smart line, when compared to the industry standard, this device produces up to four times less heat. It is capable of reducing the power consumption to 0.5 Watts, once the battery is fully charged, which is at least five times better than the industry standard.

Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart IP22 Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.

Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.

Also charges Li-ion (LiFePO₄) batteries LiFePO₄ batteries are charged with a simple bulk – absorption – float algorithm.

Check out our broad line of Battery Chargers and Solar Power Equipment.

Additional Information